Hardness’s for TopDurFlex edge hardened rules, hardening depth: min. 0.15 mm

Hardness of cutting edge:
580 HV ± 20 HV (approx. 54 ± 2 HRc)= standard
700 HV ± 20 HV (approx. 60 ± 2 HRcv)= alternatively
800 HV ± 20 HV (approx. 66 ± 2 HRc)

= alternatively

 

Hardness according to customers‘ requirements: hardness indication
± 20 HV (± 2 HRc)max. hardening depth 0.3 mm. TopDurFlex cutting
rules are mainly produced from H2 or H3X steel.

Body hardness’s for all rules:
H2 330 - 400HV ± 15 HV (ca. 32 - 41 HRc)
H2 for creasing rules 375 ± 15 HV (approx. 36-40 HRc)
H3x 405 ± 15 HV (approx. 40-43 HRc)
H3 435 ± 15 HV (approx. 43-46 HRc)
H4 520 ± 15 HV (approx. 49-52 HRc)
H5 605 ± 20 HV (approx. 54-57 HRc)
MaterialMatrixMale part
thicknesshardnessangle βr1sNo.angle αrNo.
0.71H2 TDF130°16E140°0.50S1
0.71H3x120°16E240°0.50S1
1.05H2 TDF120°16E240°0.50S1
1.05H3x110°110E340°0.75S2
1.42H2 TDF110°110E340°0.75S2
1.42H3x80°110E440°0.75S2

*not suitable for creasing rules.

Thickness STolerance
0,40 mm±0,015 mm
0,45 mm±0,015 mm
0,50 mm±0,015 mm
0,71 mm±0,015 mm
1,05 mm±0,020 mm
1,42 mm±0,025 mm
2,00 mm±0,030 mm
2,84 mm±0,030 mm

 

Cutting rules    
height 8,00 - 12,00mm H +0,005 / -0,015 mm
height 23,80mm H ±0,02 mm
height 30,00 - 50,00mm H +0,01 / -0,04 mm
height 50,00 - 100,00mm H +0,02 / -0,06 mm
TDF Special 60 W any height H +0,005 / -0,015 mm
Wavy edge rules H +0,02 / -0,05 mm
Special Rules H +0,02 / -0,05 mm
Creasing Rules    
Standard H +0 / -0,04 mm
Laser Crease H ±0,04 mm
Perforation Rules    
Standard H +0 / -0,04 mm
Stripping Rules H +0,5mm / -0,2 mm
Stripping with Perf/
Speed Stripping
H ±0,5 mm
Waved Esopick / Stripping / Stripping with Perf
H ±0,5 mm
Spacing Rules H ±0,5 mm
Plane Steel H ±0,02 mm

measured across the body. The maximum tolerance
results from height H according to the following formula:


X = max. 1 μm / mm

z.B. for height 23,8 mm :
X = 23,8 x 0,001= max. 0,024 mm

straightness of the cutting edge or the back of 1 meter length:
L = 1.000 mm X max. 0,5 mm
L bis 500 mm X max. 0,3 mm

 

admissible torsion on 1 m length:
max. 10° for any height

 

 

 

meter lengths only:

length = L = 1.000 mm
X= max. 10 mm for meter lengths
X= max. 30 mm for coils

for centre bevel and long centre bevel:


M = ±0,02 mm for thickness 0.4; 0.45; 0.5 and 0.71 mm
M = ±0,03 mm for thickness 1.05
M = ±0.04 mm for thickness 1.42 and 2.00 mm

Thickness
Height up to 25 mm
lengthsCoils
inner diam. = 360 mm
outside diam. = 470 mm
0.40 mm / 1 pt
(up to 12.0 mm height)
100 m 180 m
0.45 mm
(up to 12.0 mm height)
100 m 160 m
0.50 mm / 1.5 pt
(bis 24.0 mm height)
100 m 140 m
0.68 / 0.75 / 0.82 mm 100 m100 m
0.71 mm / 2 pt 100 m 100 m
1.05 mm / 3 pt 75 m 75 m
1.42 mm / 4 pt 50 m 50 m
2.00 mm / 6 pt40 m40 m
2.84 mm / 8 pt25 m25 m

other packaging units upon request

Specific steel weight x height x thickness = weight per meter

i.e. 7.85 x 23.80 x 0.71 = 132 g/m


1.) shaved steel rule

2.) TopDurFlex edge hardened shaved steel rule

3.) ground steel rule

4.) edge-hardened ground steel rule

5.) micro-ground steel rule

6.) mirror-polished steel rule

7.) TIN-coated steel rule

8.) anti-adhesive steel rule

9.) stainless steel and brass rule

Further bevel geometries on request. Standard angle for centre and long centre bevels is 54°. Other often used angles are 30° and 42° angle.